![]() Also turning off phantom power will make your laptop battery last longer, and depending on the quality of the interface, there might be a bit less noise. It shouldn't usually be damaged by it, but no need to take chances. The SM57 is a dynamic microphone, so you won't need to turn on phantom power (the 48V switch/indicator). The cable to be used for that is an XLR (or microphone) cable with one female and one male XLR connector (XLR cables can be expected to always be that way). Unsurprisingly, the cable from the microphone actually belongs in the socket with a microphone painted on. The cable basically is the "I think I don't have a ground loop I need to break up" cheap equivalent of a DI box. The cable you are using is for plugging the TRS output of a mixer (for example) into an instrument amp: high voltage, often low impedance. The balanced connection is pretty important at typical microphone levels in order to keep hum and noise in check. Microphones are low-impedance low-voltage, balanced connection. Guitars are high-impedance high-voltage, unbalanced connection. How can I tell if the mic is not working?Ī microphone is no guitar. This will help you troubleshoot any issues with your microphone. If it doesn't, go to Test your microphone and Start test. In Input volume, make sure the blue bar adjusts as you speak into the microphone. In Input, select a microphone to see its properties. ![]() But nothing seems to go through the mic capsule. Select Start > Settings > System > Sound. It seems the cable works, because it produces static noise when I move the mic around and the interface picks up that noise and shows that in the input LED. ![]() I logged in another mac system and tried to make it work there too, but same result. No sound whatsoever from the mic.Ĭould it be that the mic is not working? The interface works ok, as far as I can tell. Then I tried to record in Adobe Audition, Audacity and in Reaper. First installed all the drivers and set the interface as the default audio input device. I plugged the XLR female in the SM57 mic and the jack in the interface guitar input. Tried everything, installed the Focusrite USB (ASIO) driver, I made sure to set the proper input device in Windows 10 (default recording device) and output to my headphones, I switched to the Instrument line on the interface, I bumped the gain to the maximum, etc. But when I speak in the mic, I get no sound. When I handle the mic, I see the LED from the gain knob lighting up, probably from static stuff. Give this a try and please inform if you face additional issues (like: having not "plus Analog Mono Input" sound profile).I have a newly bought Scarlett Solo, in which I plugged an SM57 using an XLR to jack cable, in the guitar input. You can enter the sound preferences by clicking the Main Menu, then hit "System", "Preferences" and finally choose "Sound" Let's say: the place where the microphone is plugged in. In this window we are going to choose the right place from where the computer is going to gather sound. After that for example TeamSpeak (which I usually use to test my. Also (3) my microphone is working fine for every other app (including the web-version of WebEx) until () (4) I try to use it in WebEx. Any of these that features a Mono Input will do the trick. Following things: (1) I can see the correct microphone input in the app and (2) I can even see a signal when I plug in or unplug my headset. Of those, we should at least choose one of those that mentions a sound input: "Analog Stereo Output + Analog Mono Input" is working for this case but you may have 4.0, 5.1 Sound profiles plus Analog Mono Input. Which will offer several sound profiles, based on the abilities of the sound device itself. In this image we are choosing the appropriate sound device. Make sure you are using the appropriate sound profile for your case. Maybe you are experiencing an issue with your sound engine. Parts of this answer comes from: Sound doesn't work with Intel 5 Series/3400 chipset
0 Comments
Leave a Reply. |